Skip to content
helpyself

Change Audio Speed

Local only — nothing is uploaded unless you save or share it.

Speed audio up or slow it down, from 0.25× to 4×, keeping the pitch or letting it change with the speed.

  1. Drop in an MP3, WAV, M4A, OGG or FLAC file
  2. Pick a speed from 0.5× to 2×, or choose Custom and type anything from 0.25× to 4×
  3. Choose Keep pitch for voices and music, or Change pitch with speed for the record-player effect
  4. Press Change speed, listen to the result and download it as MP3 or WAV

Share a link

Saves this to your files and gives you a web address anyone can open. It stops working on its own.

Link lasts
Save this tool

Keep Change Audio Speed handy

Bookmark it
Embed

Put Change Audio Speed on your website

Paste this into your page. It shows the tool, free, with a link back to it.

About this tool

Change audio speed for the things people actually do with it: slow a song down to learn a guitar part, speed a lecture or a voice memo up to get through it faster, stretch a clip to fit a video, or play a recording at chipmunk speed for fun. Drop in an MP3, WAV, M4A, OGG or FLAC file, pick 0.5×, 0.75×, 1.25×, 1.5× or 2×, or type any speed from 0.25× to 4×, and the page shows the new length before you press anything. Then choose what should happen to the pitch, because there are two different jobs here. Keep pitch is a time-stretch: the audio is cut into short overlapping slices that are laid down closer together or further apart, each one nudged to wherever its waveform lines up with the last, so a voice at 1.5× still sounds like the same person and a note at half speed is still the same note. Change pitch with speed is the record-player effect: the audio is simply played faster or slower, so 2× is an octave higher and 0.5× an octave lower, and the page says by how many semitones. You can listen to the original and the result side by side, then download it as an MP3 or as a lossless WAV. The audio is decoded and processed in your browser and never leaves your device, so a private recording stays private. Very large slow-downs make sustained notes flutter slightly, which is the trade-off every time-stretch makes.

Frequently asked questions

How do I speed up audio without changing the pitch?

Leave Pitch on Keep pitch, choose a speed above 1× and press Change speed. The audio is time-stretched rather than played faster, so voices keep their tone and music stays in the same key. Measured on a test tone, 440 Hz stays 440 Hz at 2× and at 0.5×.

How do I slow down a song to learn it?

Drop the song in, choose 0.75× or 0.5× (or type a speed such as 0.6 under Custom), keep the pitch, and press Change speed. The notes stay in the same key, so you can play along on your instrument at the slower tempo.

What does Change pitch with speed do?

It plays the audio faster or slower the way a record player or tape would, so the pitch moves with the speed: 2× is an octave higher, 0.5× an octave lower, and 1.5× seven semitones up. The page shows the change in semitones before you run it. Use it for effects, or to undo a recording that was made at the wrong speed.

Will the length come out exactly right?

Yes. The result is the original length divided by the speed, to the sample: a 10-minute file at 1.25× becomes exactly 8 minutes. The new length is shown under the settings before you press the button, and again under the result.

Does changing the speed lower the quality?

Keeping the pitch at moderate speeds such as 0.75× to 1.5× is very clean. At extreme settings sustained notes can flutter slightly, which is how every time-stretch behaves. Saving as WAV adds no further loss; MP3 is encoded at 192 kbps or the original MP3's bitrate if that was higher.

Which files and how long can they be?

Anything your browser can play: MP3, WAV, M4A, AAC, OGG, Opus and FLAC. The audio has to be decoded in full, so recordings of up to about 20 minutes of stereo work in a browser tab; longer ones are refused with a message rather than crashing the page.

Is my audio uploaded?

No. The file is decoded, sped up or slowed down, and encoded in your browser, and never leaves your device. There is an API for developers that does the same to WAV files on our server, and that one does receive the file you send it.

Help improve this tool

Found a bug, want a change, or need a tool we don't have?

/change-audio-speed

↑↓ to move · Enter to open · Esc to close