Skip to content
helpyself

PPI Calculator

Local only — nothing is uploaded unless you save or share it.

Pixels per inch of any screen from its resolution and size, with dot pitch and real width.

  1. Type the screen's resolution, width and height in pixels, or pick a preset
  2. Type the diagonal size, in inches or centimetres
  3. Read the PPI, dot pitch and the screen's real width and height
 
 
 
Common screens

Save this tool

Keep PPI Calculator handy

Bookmark it
Embed

Put PPI Calculator on your website

Paste this into your page. It shows the tool, free, with a link back to it.

About this tool

PPI, pixels per inch, says how sharp a screen is: how many pixels sit along one inch of it. This PPI calculator works it out from the two numbers every screen is sold with, its resolution and its diagonal. A 27-inch monitor at 2560 × 1440 has 108.79 PPI; the same size at 3840 × 2160 has 163.18, which is why 4K text looks crisper at the same distance. The sum is Pythagoras. The diagonal in pixels is the square root of width² + height², 2937 pixels for 2560 × 1440, and dividing it by the diagonal in inches gives the PPI. The same triangle gives the rest, so you also get the dot pitch (the distance between pixel centres, 0.2335 mm here), pixels per centimetre, and the screen's real width and height in inches and centimetres, which is handy when you want to know whether a monitor fits a desk or a TV fits a wall. The aspect ratio is reduced to lowest terms, and when a resolution is only sold as a common ratio, such as 1366 × 768 as 16:9, the page says how far off it is. Diagonals are entered in inches, as screens are sold almost everywhere, but you can switch to centimetres. The last row is the viewing distance from which an eye with 20/20 vision stops seeing single pixels, about 80 cm for the 27-inch example. It is the arithmetic behind "retina" claims, based on one arcminute of visual acuity, so treat it as a rule of thumb. The presets cover common monitors, laptops, a TV and a phone. Everything runs in your browser.

Frequently asked questions

How do I calculate PPI?

Work out the diagonal in pixels with Pythagoras, the square root of width² + height², and divide by the diagonal in inches. For 2560 × 1440 that is √(6,553,600 + 2,073,600) = 2937.2 pixels, and 2937.2 ÷ 27 = 108.79 PPI. The calculator does it as you type.

What is a good PPI for a monitor?

At a normal desk distance of 60 to 80 cm, around 90 to 110 PPI looks fine and is what a 24-inch 1080p (91.79) or 27-inch 1440p (108.79) screen gives. Around 140 PPI and up looks sharp, for example a 27-inch 4K at 163.18. Laptops and phones sit closer to your eyes, so they need more: a 15.6-inch 1080p laptop is 141.21 PPI and phones are often over 400.

What is the difference between PPI and DPI?

PPI counts pixels on a screen or in an image. DPI, dots per inch, strictly counts ink dots a printer lays down, though people often say DPI when they mean PPI. For screens, PPI is the right word, and it is what this calculator gives.

What is dot pitch?

The distance from the centre of one pixel to the centre of the next, usually in millimetres. It is 25.4 divided by the PPI, so a 108.79 PPI screen has a dot pitch of 0.2335 mm. Smaller means a sharper picture.

How wide is a 27-inch monitor?

A 27-inch 16:9 screen is 23.5 × 13.2 inches, 59.8 × 33.6 cm, measured across the picture area. The frame adds a little. Any diagonal and resolution gives you its own width and height in the table.

At what distance does a screen look like retina?

An eye with 20/20 vision resolves about one arcminute, so pixels blend together beyond 1 ÷ (PPI × tan 1′) inches, roughly 3438 ÷ PPI. That is about 80 cm for 108.79 PPI and 54 cm for 163.18. It is a rule of thumb based on an eye chart, and sharper eyes see detail further away.

Can I put this calculator on my own website?

Yes. Tap Embed under the calculator and copy the code into your page. It works there for free, with a link back here.

Help improve this tool

Found a bug, want a change, or need a tool we don't have?

/ppi-calculator

↑↓ to move · Enter to open · Esc to close